Simple DIY Wall Mounted Folding Desk Workbench from a Door

Construct your personal DIY folding workbench in your storage in simply at some point! This newbie tutorial and woodworking plan makes use of a stable core door and cheap lumber to make a wall mounted folding desk for beneath $100, excellent for woodworking and different DIY tasks.

You may as well construct a big folding moveable work desk or improve your storage workshop with a DIY desk noticed workbench with storage.

DIY Folding Workbench for the Storage

I’ve a love hate relationship with my storage.

I like it when it’s clear, and I can really park in it.

I hate it (90% of the yr) when it isn’t!

I had this nice thought to make use of a paint coated folding desk as my work desk within the storage. In actuality, the desk was a dumping floor. After nearly each venture we work on round the home the instruments, and remaining elements find yourself on that desk. I’d share an image, however it’s too embarrassing!

I lastly had it final week, and cleaned every thing off and took the desk out of the storage. Now I want a desk. So why not construct one?

Listed below are my “work desk” prerequisites:

1. In a position to be simply put away so messes can’t accumulate
2. Sturdy and powerful sufficient for constructing furnishings
3. Massive working space

Looks like a fairly quick listing, however it’s what I want! So after a fast flip world wide extensive net for inspiration I provide you with The Wall Mounted Folding Desk Workbench.

I’m sharing all the information about methods to construct your personal (plus a fast DIY hack for an excellent sooner wall mounted folding desk!) so maintain studying for the detailed meeting directions.

This put up comprises affiliate hyperlinks. Be taught extra and skim our full disclosure coverage right here.

What makes this DIY wall mounted folding desk reasonably priced and simple

This minimalist DIY folding workbench or desk has a couple of key options:

• straightforward to construct (no over-engineering wanted right here!)
• straightforward to fold as much as clear up storage house
• provides you a big stable wooden work desk floor
• all for beneath $100 in supplies!

The key to this quick and simple wall mounted folding desk is that I used a solid core wood door as a substitute of plywood for the tabletop.

A solid wood door (unbored) is a perfect answer for a workbench floor in a storage or shed (or for a wall mounted folding desk desk) as a result of it’s very clean, very robust, no cuts required. And it’s a fairly reasonably priced various to a sheet of plywood or two, with added sturdiness. 

It simply takes a couple of dollars in different lumber and a few hinges to show a door into a big fold-up workbench in your storage or varied websites the place you want a drop-leaf desk.  

You may alter the scale to make a standing desk or a laptop computer laptop desk for extra school room, or perhaps a space-saving eating desk for a small residence or slender room. This drop-down folding desk would make a fantastic laundry room desk for folding garments, too! 

No casters, no cabinets — only a robust and easy wall-mounted folding desk that takes up no flooring house.

You’ll want a pocket hole jig to connect the entrance desk skirt. Aside from that, a miter noticed and nail gun make the construct go sooner, however you if you’re simply beginning out and don’t have the instruments, you may simply use a hammer and a hand saw with a miter box. Or possibly it’s a great time to spend money on a round noticed or a miter noticed!

Workbench Dimensions and Changes

The completed DIY folding workbench measures 36 inches (D) x 80 inches (W) x 41.25 inches (H) when constructed as proven. You may alter the peak to your very best standing desk top, in addition to adjusting the bench prime width and depth through the use of a 78″ or 84″ solid core door.

• I used a 36×80 non-bored solid core hardwood slab door to make this huge wall-mounted work desk. Regulate the lengths of the 80″ lumber cuts if you’re utilizing a 78″ or 84″ door as a substitute to suit your obtainable wall house.
• The peak of the folding workbench floor as listed is 41-1/4″. For a taller or shorter workbench, alter the size of the legs (and the peak that the ledger board is mounted).
  • Normal bar top is 42″ however for my (common) top one of the best standing desk top is just a bit shorter than that, so I put the work bench top barely decrease however nonetheless tall sufficient to make use of a normal barstool.
  • Make certain that you may attain the highest of the desk when folded to safe the latch.

DIY Folding Workbench Materials Record

Right here’s what you might want to construct your personal fold-up storage work desk — only a stable core door, 4 boards, and a few hinges and {hardware}. You would possibly have already got a few of these supplies in your scrap pile.

In search of a discount? You’ll want to test your native Habitat For Humanity ReStore for constructing supplies and {hardware}!

Lumber

When selecting lumber, remember to observe the following pointers and tips to decide on one of the best and straightest boards. That is particularly essential when you’re utilizing inexpensive cuts like furring strips.

Different supplies and {hardware}

Notice: There are a number of methods you may safe the fold-up workshop desk to the wall. You may use hook and eye latches, a pair items of scrap wooden, a barrel bolt lock, and so forth. I selected the heavy-duty hasp as a result of it’s robust, straightforward to put in, and locks simply.

Beneficial instruments

Reduce Record

• Ledger: lower 1 – 2×6 @ 80″
• Workbench Assist: lower 1 – 2×4 @ 80″
• Leg Assist: lower 1 – 2×4 @ 6″
• Hinge Helps: lower 2 – 2×4 @ 2″
• Legs: lower 2 – 2×2 @ 38″
• Desk Skirt: lower 1 – 1×4 @ 80″

Components Preparation

Within the leg help (2×4 @ 6″), drill 3 pocket holes alongside one lengthy edge.

Pre-drill 3 holes via every hinge help piece (2×4 @ 2″) for attaching later.

Within the desk skirt piece (1×4 @ 80″), drill pocket holes 2″ from the ends, and about each 8-10″ alongside the size of the board.

Flippantly sand all items. You may seal with an optionally available coat of poly now or after constructing.

Tips on how to Construct a DIY Folding Workbench

Step 1: Mark The Wall, Ledger, and Wall Studs

First, discover the middle of the wall house the place your desk will go — ensure that your 80″ desk will match! Mark the 40″ heart on the wall.

Subsequent, mark the peak of the 2×6 ledger, which can be 41-1/4″ from the ground. In case you are taller or shorter, you may alter this top to your desire. You’ll additionally want to regulate the size of your 2×2 folding workbench legs.

Mark the middle (40″) of your 2×6 that you just lower @ 80″.

Discover and mark the stud areas. In my storage the partitions weren’t painted so I may simply see the place my wall studs have been. You’ll want to discover and mark the place your whole studs are earlier than you dangle your 2×6 ledger board.

Step 2: Cling the Ledger

The ledger will maintain your entire DIY folding workbench to the wall, so make sure it’s degree and well-secured to the wall studs with heavy obligation fasteners. You might want an additional set of arms for this step. 

Match the 2 heart marks from the wall and the two×6 ledger. Place the extent on the board and ensure that it’s degree at 41″.

Utilizing the end nail gun, place 3 or 4 nails in studs to carry the 2×6 in place.

End up by drilling 2 – 3″ screws via the 2×6 at every wall stud location.

Step 3: Cling the two×4 Workbench Assist

Measure down from the highest of the ledger board 1-3/4″. This would be the mounting top in your 80″ 2×4 workbench help, and can permit the folding desk to take a seat on the two×4 whereas in use, including stability to your desk.

This subsequent step is rather like hanging the two×6. The highest of your 2×4 needs to be in your 1-3/4″ mark. Be certain the ends are flush with the two×6, degree the two×4, and fasten with 3-4 nails as earlier than.

Then, drill 2 – 3″ screws via the two×4 into the two×6 at every stud location.

Step 4: Connect Hinge Helps to Desk High

Now it’s time to work on the precise desk!

Except you might have tremendous human power you want somebody that will help you transfer your stable core door to an acceptable work location. In my case it was on the driveway as a result of I didn’t have a piece desk! Sawhorses are a fantastic addition to your workshop to raise your work on a venture like this.

Measure on the underside of your door 3-1/2″ from the entrance nook on either side. Place the 2x4x2″ hinge help items behind the mark. You should use clamps to carry in place as nicely.

Screw 2×4 items into place utilizing 2-1/2″ or 3″ screws. (I pre-drilled 3 holes in these items in order that they didn’t cut up once I drilled screws into them.)

For added safety, you may also use wooden glue with the screws.

Step 5: Connect the Desk Skirt

Connect the desk skirt to the underside of the workbench prime at 1-1/2″ from the entrance edge, utilizing pocket gap screws.

To put in the entrance skirt piece I made a jig to hurry up the method.

I used a leftover piece of the two×2 and nailed it to a chunk of 1×4. Then I positioned the two×2 aspect on prime of the door, and pressed the skirt in opposition to it as I screwed the skirt to the underside of the desk utilizing the pocket holes. Be certain your ends are flush earlier than you begin attaching with pocket gap screws!

Step 6: Connect the Workbench Legs and Hinges

Connect the small hinges to the 2x2x38 legs. Mark heart on the alternative aspect of the leg from the hinge on every leg, and mark heart on the surface of the 2x4x2 items mounted to the desk.

Line up the middle marks, and fasten the opposite aspect of the hinge to the within of the 2x4x2 block.

I initially used the screws offered for this step, however discovered they allowed an excessive amount of motion when reducing the door. So I changed them with 2″ screws as a substitute.

Step 7: Connect the Leg Assist

Fold your legs in order that they sit in opposition to the underside of the desk, and fasten the 2x4x6 items utilizing pocket holes  and a couple of″ screws so the board sits in opposition to the desk legs. That is the place the legs will relaxation when the desk is folded up.

Step 8: Connect the Desk to the Ledger with Hinges

Time to name in your heavy lifting helper once more! Whereas holding the legs in place, carry the work desk to the ledger board you might have already hooked up to the wall.

That is the second of fact. Enable the legs to fold down, and place the again of the desk on the two×4. Your desk ought to sit firmly on the bottom. You might must straighten the legs in order that they sit flush on the bottom and on the two×4 blocks on the underside of the desk.

Tip: If the ground isn’t precisely degree and also you desire a safer leg contact with the bottom, use a big washer beneath the leg.

Now measure a 1/2″ hole between the two×6 and the again of the desk. It will permit the hinge to maneuver freely.

Connect the hinges to the desk and the two×6. I put in 2 hinges 4″ from the sting, and one within the heart.

Take a look at out these hinges with a helper! Fold your door up, and mark the place the highest edge meets the wall on a wall stud as near the heart of the desk as potential. Decrease your desk down once more. It’s enjoyable isn’t it!

Two extra last touches and you’re finished!

Step 9: Set up the Hasp

This hasp and latch are the important thing to the “fold-up” a part of the folding workbench. The twisting a part of the hasp goes on the aspect of the work desk, and the hinged a part of the hasp goes on the wall (within the wall stud for safe attachment).

Measure the place that stud is in relation to the tip of your desk. Switch that measurement to the entrance of your desk, and fasten the twisting piece of the hasp to your desk.

Set up the hinged a part of your hasp 1/2″ above the road you marked and the identical distance from the tip of the desk.

Now it is best to be capable of fold your desk up and lock it in place! Strive it out!

Step 10: Apply End Coat (Optionally available)

The ultimate step is optionally available. I brushed on a coat of polyurethane to guard my desk prime. This one is completely as much as you!

I hope you get pleasure from your new CLEAN workspace!

Subsequent up for me is cleansing up the storage house, and I’m contemplating including pegboard beneath the bench to retailer extension cords and different low-profile instruments and supplies.

Extra House Saving Options for Your Storage